MXM Series

MXM Series

 

Downloads

Max. Discharge Capacity:up to 146 GPM

MXM Chemical Process Pumps

The MXM series design offers the best combination of durability, safety and performance for a wide range of
chemical process applications. MXM models feature separate impellers and inner magnets maximizing the flexibility and application of the product.
 

Curves Curves
  MXM22 Impeller Range #1
  MXM22 Impeller Range #2
  MXM44 Impeller Range #1
  MXM44 Impeller Range #2
  MXM54 Impeller Range #1
  MXM54 Impeller Range #2
  MXM54 Impeller Range #3
  MXM54 Impeller Range #4
Dimensions
  MXM-22
  MXM-22 with motor
  MXM-44
  MXM-44 with motor
  MXM-542
  MXM-542 with motor
  MXM-543
  MXM-543 with motor
  MXM-545
  MXM-545 with motor
Specifications
Datasheets
  MXM22-1
  MXM22-2
  MXM44-1
  MXM44-2
  MXM54-1
  MXM54-2
  MXM54-3
  MXM54-4
Instruction Manual
MXM Catalog
M Series Catalog

   
Features
 
  • Dry run capability - With proven dry run capability and our unique self-radiating bearing lubrication circuit (PAT.), the MXM is able to withstand process-upset conditions.

  • Heat dispersion holes located strategically behind the impeller facilitate removal of frictional bearing heat and improve bearing lubrication and cooling circuit flow under dry run or poor suction conditions.

  • Two piece rear casing design - Offers improved pressure handling capability and a second barrier for improved safety. The front casing features injection-molded liner with guaranteed uniform thickness and is fully covered by a ductile cast iron cover for combination of chemical resistance and mechanical integrity.

  • All designs have ANSI 150# flanged connections.

  • Dual end supported precision ground shafts and balanced compact high strength

  • Samarium Cobalt magnet capsule result in balanced lightweight inner magnet capsule assemblies optimizing torque transmission and pump efficiency.

  • High strength rare earth magnets are totally encapsulated within fluororesin moldings.

  • Close-coupled back pull-out design - Allows the operator to inspect the pump while leaving the line pressurized.
 
Specifications
MODEL
CONNECTIONS
SUCTION x DISCHARGE
in (mm)

MAX CAPACITY
GPM (LPM)

MAX HEAD
FT (m)
MINIMUM FLOW
GPM (LPM)
MOTOR / FRAME
MXM22-1
1" x 1"
(25.4 x 25.4)
55 (208.2) 38 (11.6) 2.5 (9.5) 1/2 - 3/4 HP/56C
MXM22-2
65 (19.8)
MXM44-1

1.5" x 1.5"
(38.1 x 38.1)

75 (283.9) 82 (24.9) 5.3 (20.0) 1 HP / 56C
MXM44-2
72 (272.5) 97 (29.5) 2 HP / 145 TC
MXM54-2
2.0" x 1.5"
(50.8 x 38.1)
95 (359.6)
98 .(29.8)
5.3(20.0)
2 HP/ 145 TC
MXM54-3
128 (39.0)
3 HP/ 182 TC
MXM54-5
160 (605.6)
146 (44.5)
13.2 (49.9)
5 HP/ 184 TC