DDC Series

DDC Series - 12VDC Centrifugal Pumps

 

Downloads

Max. Discharge Capacity: up to 2.2 GPM

DDC Series

Designed for OEM applications such as Thermal Management, Laser Cooling and Medical Equipment

The Laing DDC is an electronically commutated spherical motor pump, with an expected service life of 50,000 hours if pumping water or a mixture of water and glycol. *Please contact us regarding any other media requirements. The only moving part in a spherical motor pump is a spherically shaped rotor/impeller unit, which is seated on an ultra-hard, wear-resistant ceramic ball. The conventional shaft, shaft bearings and shaft seals have been eliminated. The spherical motor design permits economical operation with comparatively high output. Supply voltage variation provides a simple means of controlling the speed of the DDC pump over a large output range. All parts in contact with the medium are 100% corrosion resistant. With an optional tachometer output, it is possible to monitor the speed of the pump directly.

 

Manual Instruction Manual
Catalog Catalog

     
Features
 
  • ECM - Electronically Commutated Motor
  • Ultra Efficient
  • Low Power Consumption
  • Long Life
  • Continuous Duty
  • Variable Speed
  • Small Footprint
  • Very Quiet
 
Specifications
Motor design:   Electronically commutated spherical motor
Rated voltage:   12 Volt DC
Power consumption:   DDC 3.1: max. 12 Watt, DDC 3.15: max. 12 Watt,
DDC 3.2: max. 18 Watt, DDC 3.25: max. 20 Watt
Voltage range:   8 to 13,2 Volt*
Acceptable media:   Water, Water-/Glycol Mixtures**Other media on request
Max. system pressure:   21.75 PSI
Max. system temperature:   140° F
Wetted parts:   Rotor/impeller material: stainless steelgrade 316Ti
    PPS-GF40 is the pump housing material and the impeller
    EPDM O-ring
    Aluminum oxide ceramic ball
    Carbon bearing cap
Electrical wire connection:   PA6.6 GF35

*Minimum startup Voltage 9 Volt
** Check pump performance for mixtures of 20% or more glycol